Product

Home – Product

1.3 inch white LCD 30pin soldering FPC 8 BIT SPI I2C small OLED display screen panel module

This display screen module, with diagonal of approximately 1.3 inches, is highly readable due to the high contrast offered by an OLED display. The 1.3 inch display is composed of 128×64 individual white OLED pixels. The light of each pixel can be turned on or off by the controller chip, and no backlight is needed as it has its own light source of white.
All OLED displays are placed on a breakout PCB along with support circuitry, allowing you to use this little wonder with 3.3V(Feather/Raspberry Pi) or 5V(Arduino/Metro328) logic levels. An auto-reset circuitry is also designed, making the reset pin optional. Since it communicates via I2C, it can be easily connected with just two wires – power and ground. Thanks to an I2C command structure, the board’s firmware maintains speed by updating only the part of the screen that changes, similar to the concept of “Dirty Rectangles” or “Bit blit” operations in computer graphics.
The power requirements depend somewhat on how much of the display is lit. On average, the display uses about 20mA from the 3.3V supply. Built into the OLED driver is a simple switch-cap charge pump that converts 3.3V-5V into a high voltage drive for the OLEDs.
This screen has high contrast due to its low power requirement. Its crispness and miniature size are also significant advantages preferred by both users and suppliers, making it one of the easiest ways to incorporate an OLED into your project.

Product Features:

NO. Item Contents
1 Screen Size 1.3 Inch
2 Display Resolution 128×64
3 Display Mode Passive Matrix
4 Display Color Monochrome (White)
5 Panel Size 34.50(W) x 23.00(H) x 1.4(T)(mm)
6 Active Area 29.42(W) x 14.70(H) (mm)
7 Pixel Pitch 0.23 x 0.23 (mm)
8 Pixel Size 0.21 x 0.21 (mm)
9 Number of Pin 30pin
10 Driver IC SH1106 with internal DC/DC circuit
11 Interface 8-bit 68XX/80XX Parallel, 4-wire SPI, I2C
12 Weight 2.18(g)

Application Scenario

Helmet display

Night vision observation

Electronic aiming

Other specialized fields

Consumer entertainment fields

Consumer entertainment fields

Features

Aurora is a China-based OLED display manufacturer. Aurora’s 1.3 inch OLED screen module supports full customization and is widely used in energy storage inverters, industrial control equipment, wearable devices vehicle locators and other electronic projects and equipment. It is not only of the characteristics of wide viewing angle, but also has high reliability and high contrast.Aurora is a China-based OLED display manufacturer. Aurora’s 1.3 inch OLED screen module supports full customization and is widely used in energy storage inverters, industrial control equipment, wearable devices vehicle locators and other electronic projects and equipment. It is not only of the characteristics of wide viewing angle, but also has high reliability and high contrast.

Click to view full image

Applications

The 1.3-inch OLED screen module, with features such as low power consumption, small size and excellent display effect, are widely used in devices like

About Us

Aurora Electronic Technology Co., LTD

Our company is a national high-tech enterprise specializing in the research and development, production and sales of liquid crystal display devices. The company was established in 2012, and its products include LCD monochrome display screens, TFT color screens, OLED display screens and modules, etc. It has a full set of production and experimental equipment such as LCD manufacturing, COB bonding, COG bonding, TAB hot pressing, SMT high and low temperature test box, vibration meter, etc., which can fully realize the design, production and quality control of display modules.

Why choose Us

Industry Experience

Since its establishment in 2012, the company has accumulated extensive experience in the LCD display device industry.

Production Facilities

The company has advanced production facilities in Shenzhen and Yangjiang, equipped with comprehensive production and testing equipment to ensure efficient production and quality control.

Strong R&D Team

With a team of 30 R&D personnel focused on new product development and technological innovation, ensuring technological leadership and market competitiveness.

OEM & ODM

Offering OEM and ODM customization services, providing personalized solutions based on customer needs to meet different market demands.

High-Quality Standards

Strictly controlling every phase of the production process to ensure high-quality and consistent products, earning customer trust.

Environmental

Committed to developing environmentally friendly and sustainable products using organic cotton, natural fibers, and recycled materials, promoting green manufacturing.

Contact Us

Our company is a national high-tech enterprise specializing in the research and development, production and sales of liquid crystal display devices. If you want to get more information, please contact us.

Get a quote

Get a quote